2016 -- H 7627

========

LC004824

========

     STATE OF RHODE ISLAND

IN GENERAL ASSEMBLY

JANUARY SESSION, A.D. 2016

____________

A N   A C T

RELATING TO HEALTH AND SAFETY - STATE BUILDING CODE

     Introduced By: Representatives Shekarchi, McEntee, and Serpa

     Date Introduced: February 12, 2016

     Referred To: House Labor

     (by request)

It is enacted by the General Assembly as follows:

     SECTION 1. Sections 23-27.3-113.6 and 23-27.3-128.2.1 of the General Laws in Chapter

23-27.3 entitled "State Building Code" are hereby amended to read as follows:

     23-27.3-113.6. Plot plan. -- There shall also be filed a plot plan showing to scale the size

and location of all the new construction and all existing structures on the site, distances from lot

lines, and the established street grades; and the plan shall be drawn in accordance with an

accurate boundary line survey, and, when necessary, by a registered land surveyor if required by

the building official. If the building and/or zoning official determines that a site plan or plot plan

is necessary, it shall be prepared by a registered professional land surveyor as defined in §5-8.1-

2(14) and in accordance with rules and regulations as defined in §5-8.1-2(19). If demolition is to

be performed, the plot plan shall show all construction to be demolished, and the location and size

of all existing buildings and construction that are to remain on the site or plot. The plot plan shall

not be changed except as specified in § 23-27.3-115.4.

     23-27.3-128.2.1. Drawings and specifications. -- All drawings, specifications, and

computations for new construction, alteration, repair, or expansion work involving the practice of

professional engineering, professional land surveying, or architecture as defined by Rhode Island

state law, shall be prepared by professional engineers, professional land surveyors, or registered

architects as licensed or registered by the state. All the drawings, computations, and specifications

required for a building permit application for the work, must be prepared by or under the direct

supervision of a professional engineer, professional land surveyor, or registered architect and bear

his or her signature and seal in accordance with the Rhode Island statutes and regulations

governing the professional licensing or registration of engineers, land surveyors, or architects,

and shall signify to the best of his or her knowledge that the drawings, computations, and

specifications shall meet the applicable provisions of this code and acceptable engineering

practices and all applicable laws and ordinances.

     SECTION 2. This act shall take effect upon passage.

========

LC004824

========

LC004824 - Page 2 of 3

EXPLANATION

BY THE LEGISLATIVE COUNCIL

OF

A N   A C T

RELATING TO HEALTH AND SAFETY - STATE BUILDING CODE

***

     This act would require that all plot plans be prepared by professional engineers,

professional surveyors or registered architects, and would prohibit anyone acting under the direct

supervision of those professionals from preparing such plans, drawings or specifications.

     This act would take effect upon passage.

========

LC004824

========

LC004824 - Page 3 of 3